The Phottix Odin™ TTL Flash Trigger, Phottix’s award-winning TTL flash trigger. Photographers can wirelessly control and trigger TTL flashes, while retaining full TTL functions and remotely control power and flash zoom settings.
The Phottix Odin TTL Trigger consists of an on-camera transmitter and control unit (TCU) and receiver units for compatible hot shoe flashes.
The Odin offers photographers four wireless channels and three flash control group designations. Flashes can be controlled in traditional Canon TTL ratio modes A:B with EV +/- adjustments of three stops.
What makes the Phottix Odin™ unique is the ability to designate groups in TTL/Mixed mode. Individual groups, A, B, C, can also be controlled in TTL mode with EV +/- adjustments. Groups can also be set to Manual mode, adjusting power levels remotely, or turned off.
Flash head zoom can be set to be dynamically adjusted as photographers adjust their lenses. Flash zoom can also be easily adjusted manually and set statically from 24 to 105 mm. The Phottix Odin system will also trigger compatible non-TTL flashes and studio strobes.
The Phottix Odin™ TTL Flash Trigger will trigger Phottix Strato 4-in1, Strato II Multi 5-in-1 and Atlas II triggers. Strato and Atlas II transmitter will not trigger Odin receivers. Because the world of cameras and flashes changes the Phottix Odin system can be upgraded when needed using the built-in USB ports.
The four-channel, 2.4 GHz, transmitter and receiver units work at ranges of more than 100 meters and accept AA batteries.
Please note: Some third party TTL flashes may function with the Phottix Odin. Due to the vast number of third party alternatives Phottix will not test, support or troubleshoot third party flashes. For more detailed information please check the version specific information below.
|Groups||3 groups – A, B, C|
|Battery||2 x AA batteries (TCU and receiver), 5V DC on receiver (external power port)|
|Voltage||2.4 – 3.2 V|
|Flash port voltage handling||6V (transmitter) ≤300V(receiver)|
|Attachment||¼ tripod lug, cold shoe (receiver)|
|Dimensions||94(L) x 66(W) x 35(H) mm, (transmitter), 90(L) x 45(W) x 40(H) mm (receiver)|
|Weight||105g (transmitter), 66g (receiver) – without batteries|
|Max sync speed||1/8000 sec|
|Output||Hot shoe, 3.5 mm port (receiver)|
|Operating temp||-15 ~ 65 C|
|Storage temp||-30 ~ 85 C|
|Signal input||USB port (transmitter and receiver)|
Compatible Canon EOS digital cameras; 100D, 300D, 350D, 400D, 450D(Kiss X2), 500D(Kiss X3), 550D, 600D, 650D, 700D, 1000D, 1100D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, 70D, 5D Mark II, 5D Mark III, 5D, 6D, 7D, 1D Mark II, 1D Mark III, 1D Mark IIN, 1D Mark IV, 1DS Mark II, 1DS Mark II, 1DX, G12, G1X, EOS M.
Compatible with the following Canon flash: 270EX, 270EXII, 320EX, 380EX, 420EX, 430EX, 430EXII, 550EX, 580EX, 580EXII, 600EX; Phottix Mitros and Mitros+ TTL flash.
*As new camera and flash models are released these lists may be modified.